Learning Procedure Note: The Handheld Remote Control System features a learning frequency function designed to prevent potential interference from other remote units. Follow these steps to set it up:

Step 1: Open the battery cover on the remote and insert two DC3V, AAA batteries.

Step 2: Turn on the receiver's AC power within 30 seconds.

Step 3: Press and hold the "LEARN" key on the remote for over 5 seconds. Once the receiver detects the frequency, it will emit two "Bi Bi" sounds, indicating successful learning of the previously selected frequency from the transmitter.

Note: Do not press any other buttons on the transmitter after turning on the AC power, as this may disrupt the learning process.

After completing these steps, you should be able to control the ceiling fan and light. If the fan does not respond to the transmitter, turn off the receiver's power and repeat steps 1 and 2.

Note: Remove the batteries if the remote will not be used for an extended period to prevent damage.

Battery Required : AAA Battery 2 pack
Frequency Type : RF/Bluetooth
Dimensions: 2.00 x 6.00 x 1.00 (W x L x D, inches)