The Anderic RRAV498 is an exact replacement of the original Yamaha RRAV498 remote control and replaces original equipment Yamaha® AV receiver remotes. The RRAV498 will work right out of the package for compatible Yamaha AV receiver models listed (but not limited to) without any programming. The RRAV498 is a preprogrammed receiver remote for Yamaha, but can also be programmed to many other devices. This remote includes popular features like selection of the inputs along with complete menu controls and, of course, all other buttons for normal operations. The RRAV498 can be programmed to other equipment using the provided operating manual or your original equipment manual of the AV receiver. Please refer to the operating manual for instructions on programming.

Note: This remote only operates in ZONE 1. If your receiver supports ZONE 2, this remote will not operate ZONE 2 controls but will operate, as normal, for ZONE 1.
- Preprogrammed for your Yamaha Receiver. No programming necessary.
- Modeled after the original Yamaha RAV498 remote control.
- The instruction booklet is included.
- The RRAV498 can be programmed for use with other units (i.e. TV, DVD, SAT, Etc.).
- Guaranteed to work your select Yamaha receivers (see "Used with Models" section to see if your unit is compatible).

Common Questions:

How do I program my remote for external devices (i.e. TV, DVD, SAT, etc.)?

• See the code list section of your user manual to find the corresponding code depending on the brand of the device you want to register.
  • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes.
• Press [CODE SET] key using a pointed object such as the tip of a ballpoint pen.
  • SOURCE/RECEIVER blinks twice.
  • Perform each of the following steps within one minute. Otherwise, the setting will be canceled. If this happens, repeat from step two.
• Press the input selection key.
  • For example, press the HDMI 1 to set the remote control code for the playback device connected to the HDMI 1 jack. 4.
  • Use the numeric keys to enter the 4-digit remote control code.
  • Once the remote control code is registered successfully, SOURCE/RECEIVER blinks twice
  • If it blinks six times, registration has failed. Repeat from Step two.

How do I Reset the remote control codes?

• You can reset a remote control code registered to each input selection key.
• Press [CODE SET] key using a pointed object such as the tip of a ballpoint pen.
  • • SOURCE/RECEIVER Blinks twice
    • Perform each of the following steps within one minute. Otherwise, the setting will be canceled. If this happens, repeat from step one.
  • Press the input selection key you wish to reset.
  • Use the numeric keys to enter “5098”. Once the remote control code is reset successfully, SOURCE/RECEIVER blinks twice. If it blinks six times, resetting has failed. Repeat from step one.

How do I reset the remote control to factory default settings?

• Press [CODE SET] key using a pointed object such as the tip of a ballpoint pen.
• Press SOURCE/RECEIVER.
• Use the numeric key pad to enter “9981”.