Remote is NO LONGER AVAILABLE and has been replaced with the Anderic RMC12249.
The Anderic RRTV501D remote control replaces many original equipment Sony DVD/VCR Recorder remotes. The RRTV501D will work right out of the package for compatible Sony DVD/VCR Recorder models listed (but not limited to) without any programming. The RRTV501D is a pre-programmed Sony DVD/VCR Recorder remote and cannot be programmed to any other devices. The remote includes popular features like MENU, INPUT and of course, all other buttons for normal operations. For detailed information on how to use this product with your Sony DVD/VCR Recorder, please refer to your Sony DVD/VCR Recorder's operating manual.
Additional information:
- This remote only works Sony DVD/VCR Recorders
- This remote will NOT program to any other devices (TVs, Cable boxes, etc.)
- Full MENU features are supported with this remote
- NO PROGRAMMING REQUIRED
-
WARNING: Before ordering this remote, please compare the buttons on this remote with the buttons on your original remote to make sure this remote will operate all the buttons you need.
USING THIS REMOTE:
This remote has two modes: TV and DVD/VIDEO. All keys with the maroon dot beside them require the remote to be in TV mode to operate, including the POWER key. For DVD functions, you must be in DVD/VIDEO mode. To switch between modes, simply press the mode key at the top of the remote. Press the TV key to switch to TV mode, or press the DVD/VIDEO key to switch to DVD mode.
The RMC12249 is a ready-to-use replacement for Sony DVD players and DVD/VCR combo units, modeled after the Sony RMTD240A with no programming required. This remote operates in two modes: TV and DVD/VIDEO. Press the mode key to switch between modes—use TV mode for keys marked with a maroon dot, including the POWER key, and DVD/VIDEO mode for disc functions. Essential functions include MENU, SLEEP, DISC MENU, and full playback controls. The RMC12249 is fixed to operate on DVD3 only; if your device displays "DVD1" or "DVD2," use your original Sony remote to reset it to the default DVD3 code set. This remote is designed specifically for Sony DVD and DVD/VCR combo players and cannot be programmed for other devices like TVs or cable boxes.
Compatible replacement for: RMT-D224A, RMT-D133A, RMT-D115A, RMT-D120A, RMT-D126A, RMT-D119A, RMT-D137A, RMT-D143A, RMT-D203, RMT-D203A, RMT-D205A, RMT-D218A, RMT-D223A, RMT-D229A, RMT-D240A, RMT-D241A, RMT-D244A, RMT-D246A, RMT-D254A, RMT-D255A, RMT-D257A, and many more.
Battery Required : AAA Battery 2 pack
Frequency Type : IR
Dimensions: 2.00 x 6.00 x 1.00 (W x L x D, inches)
