The Anderic RRFA0318 is a ceiling fan remote paired via the learn key (A23 12V). It works with ceiling fans such as 43341, 43299 and 43377.
How to confirm the fit
Find the FCC ID on the back of your old remote or inside its battery compartment. It should match 2BLBD-FA0318 or A25-FA0198A. If your remote shows a different FCC ID, this remote will not work with your fan's receiver.
Specifications
- Shipped remote: Anderic RRFA0318
- FCC ID: 2BLBD-FA0318 / A25-FA0198A
- Radio frequency (RF): 433.92 MHz
- Battery: 1 A23 (not included)
Good to Know
- It works only with the receiver type your old remote controlled; check the FCC ID before ordering.
- It is a model-specific fan remote, not a universal remote.
Setup / Pairing
Installing the battery
- Remove the remote from the wall plate.
- On the back of the remote, press the tab on the battery cover down towards the cover, then lift it up with your fingernail.
- Insert 1 A23 (12V) battery, matching the polarity diagram inside the battery compartment. The battery is not included.
Pairing (2 steps)
- Cycle the power to the fan by turning it off, then back on, using the wall switch or circuit breaker.
- Tap the learn key in the remote's battery compartment.
- Test the fan functions to make sure the remote is properly controlling the fan.
Troubleshooting
- The LED indicator should light when any remote button is pressed. If not, replace the battery.
What's in the Box
- 1 Anderic RRFA0318 remote
- Wall mount bracket
- Battery not included
Compatible Models
- Harbor Breeze FA0198, A25-FA0198A
- Supplied with: 43341, 43299, 43377, 43300, 43378
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
FCC ID : 2BLBD-FA0318, A25-FA0198A
Frequency (MHz) : 433.92
Dimensions: 2.00 x 6.00 x 1.00 (W x L x D, inches)