The Anderic RR3720 is a universal projector remote with code library and learning.
Specifications
Shipped remote: Anderic RR3720
Infrared (IR); point it at the device
Batteries: 2 AAA (not included)
Good to Know
Not pre-programmed: needs a 4-digit code, code search or learning
Key layout and labels differ from the original remote; use the learning function to add any model-specific keys
IR only: line of sight to the projector is required
Setup / Pairing
Turn on the projector.
Press and hold Mute and the Down key for about 3 seconds until the indicator light stays on, then release.
Enter the 4-digit code for your projector brand from the code list; the light goes off if the code is valid.
Check that most keys work; if not, repeat with another code for the brand, or hold Power during code search until the projector responds.
Troubleshooting
If the indicator blinks three times after you enter a code, the code was not accepted; enter it again or try another code for your brand.
If no key is pressed for 30 seconds, the remote leaves programming mode; start again.
When learning, hold the two remotes 1 to 2 inches apart with the IR ends pointing at each other. Three flashes mean the key was not learned; start that key again.
To clear learned keys, hold Mute and OFF for about 3 seconds until the light flashes twice. To reset, hold Mute and Reset the same way.
What's in the Box
1 Anderic RR3720 universal projector remote
Batteries not included
Compatible Models
LCD and DLP projectors from many brands
Works with many Canon projectors, including models starting with LC44, PTL79, BL36 and BL60.
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.
Model: RR3720 Universal with Learning Part Number: RR3720 Catalogue No.: 274642
Battery Required : AAA Battery 2 pack Frequency Type : IR Dimensions: 2.00 x 7.50 x 1.00 (W x L x D, inches)
Customer Reviews
6 reviews
by Devin on August 30, 2024
Seems to work! I haven't found any codes where every button works, but that's just the reality with universal remotes a lot. It does everything I need it to.
by TAIWO on August 14, 2024
Thank you for checking. The remote works very well.
Thank you.
by Rae D on March 25, 2024
Worked perfectly with our JVC projector! Thanks!
by Richard on March 17, 2023
The Universal Report that was recommended by Erick, worked perfectly!
by David on February 01, 2023
Worked as advertised!
by Sue on December 29, 2022
Not exactly a match - does not turn the projector off. Other functions work