The Anderic RH786R/RR787T-KIT is a substitute for the Kichler RH786R receiver. It is a ceiling fan remote and receiver kit.

Specifications

• Kit: Anderic RH786R/RR787T-KIT
• Radio frequency (RF)
• Battery: 1 23A (not included)

Good to Know

• Requires wiring; no up-light control
• Key names and layout may differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

1. Turn off the power at the circuit breaker or fuse box. Unplug the old receiver and plug in the RH786R, following your fan's instructions.
2. Remove the remote's battery cover and set its dip switches to any setting you choose; the fan learns the setting. Install the 23A battery (not included).
3. Restore power to the fan. Do not press any other button before SET.
4. Within 60 seconds of restoring power, press and hold SET for 1 to 5 seconds.
5. The light blinks twice: the fan now responds to the remote.
6. If you pressed another button first or it does not pair, turn the power off and on again and repeat from step 3.

What's in the Box

• 1 remote and 1 receiver
• Battery not included

Compatible Models

• Kichler RH786R

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.