The Anderic KTN828 is a substitute for the Samsung DB96-24901V remote. It is a universal air-conditioner remote with a backlit LCD. It works with Samsung air conditioners such as AR12BSFCMWKNCV, AR15BSFCMWKNCV and AR24BSFCMWKNCV.

Specifications

• Shipped remote: Anderic KTN828
• Infrared (IR): aim it at the device; a clear line of sight is needed
• Batteries: 2 AAA (not included)
• Wall-mount holder

Good to Know

• Not ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)
• Key layout and labels differ from the original remote

Setup / Pairing

1. Insert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.
2. Method 1, programming using code input: find the codes listed for Samsung in the code section of the manual. For Samsung, the codes start with 0188, then 0189, 0190, 0191.
3. Press SELECT; the code section on the screen flashes.
4. Enter the first 4-digit code listed for Samsung (0188). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.
5. Once you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.
6. Method 2, programming using auto-search (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.
7. Press and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.
8. When the AC responds, immediately press any key to save the current code.
9. Try the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.

What's in the Box

• 1 Anderic KTN828 remote
• Wall mount bracket
• Batteries not included

Compatible Models

• Samsung DB96-24901V
• Works with many Samsung air conditioners, including models such as AR15BSFCMWKNCV, AR24BSFCMWKNCV and AR07BSFCMWKNCV.

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.