The Anderic BL-FP240G projector lamp assembly is a replacement lamp module for select Optoma projectors that use part numbers BL-FP240G and SP.7AZ01GC01. It includes a complete housing with a bulb installed, so no additional assembly is required.
Specifications
- Shipped lamp: Anderic BL-FP240G
- Also known as: SP.7AZ01GC01
- 240W lamp module
Good to Know
- For compatible Optoma projectors only. It will not work with other brands or different Optoma lamp part numbers.
- Brightness and lamp life vary by projector model. Check the specifications for your projector.
- After you install the new assembly, reset the lamp timer in the projector menu. See your projector's user manual for the exact steps.
Setup / Pairing
- Turn the projector off and let it cool for at least 30 minutes, then disconnect the power cord.
- Unscrew and remove the lamp cover.
- Unscrew the lamp module, lift the handle, disconnect the lamp cord if your model has one, and lift the module out carefully. Do not touch the glass of the bulb.
- Install the new Anderic BL-FP240G assembly by reversing those steps and refitting the cover. The projector will not turn on if the lamp cover is not in place.
- Turn the projector on and reset the lamp timer. On many Optoma models this is Menu, then Setup, then Lamp Settings, then Lamp Reset, then Yes. Use the path in your projector's user manual if it differs.
What's in the Box
- 1 Anderic BL-FP240G projector lamp assembly
Compatible Models
- Optoma HD143X, HD144X, HD243X, HD270E, HD27Be, HD27E
- Optoma WU334, WU335, WU336, WU337
- Optoma DH350, EH334, EH335, EH336, EH337
- Other part numbers: SP.7AZ01GC01
Before ordering, check the model or part number printed on your old lamp assembly or in your projector manual and compare it to this list.