The Anderic 99119WM is a white wall mount bracket for Hunter 99112 and similar-style remotes. It replaces 99119.
Specifications
Shipped bracket: Anderic 99119WM
Good to Know
It is a bracket only: no remote is included.
It fits only Hunter 99112 and similar-style remotes; other remote shapes do not fit.
Screws and faceplate are not included.
Setup / Pairing
Hold the bracket in place on the wall and mark the screw holes.
Fasten it with suitable screws (not included) and slide the remote in.
Troubleshooting
Fan will not start: check that power is on at the breaker and wall switch, the battery is good, the remote and receiver are paired, and the receiver wiring in the canopy is secure.
Erratic or short range: check that the battery is installed correctly, or install a fresh battery.
Lights do not dim: change the battery and check for CFL or non-dimmable LED bulbs; the control turns off dimming when it detects them. Incandescent bulbs dim best.
What's in the Box
1 Anderic 99119WM bracket
Compatible Models
Fits: Hunter 99112 and similar-style remotes
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Specifications
Model: 99119 Part Number: 99119WM Catalogue No.: 203131
Dimensions: 1.00 x 3.25 x 1.00 (W x L x D, inches)
Customer Reviews
10 reviews
by BENJAMIN on March 25, 2024
Perfect. This is the exact part I was looking for for a great price.
by Randy on November 10, 2022
Received actually as the photo presented
by Craig on November 01, 2020
Exactly what I needed!
by mark on October 15, 2020
Works great. It didn't fit my non hunter remote but a little trimming with my dremel and it works fine. No more tape or holes in the wall.
by Kevin on August 22, 2020
Just hat I needed.
by Melinda on August 20, 2020
Perfect to keep the fan remote in one place. It hangs on a "hook" at the top. I wish there was a Velcro attachment to hold the bottom still.