The Anderic 971LM is a garage door opener remote for 390 MHz Security+ openers with a red or orange Learn button.

Specifications

• Shipped remote: Anderic 971LM
• Radio frequency (RF): 390 MHz
• Battery: 1 CR2032 (not included)

Good to Know

• It works only with red or orange Learn button openers. It is not compatible with openers or remotes that use code (dip) switches, and it is not for yellow, purple or green Learn button openers.
• Not for MyQ-only or other brands and types not listed here.

Setup / Pairing

1. Close the garage door and stand close to the opener.
2. Locate the red or orange Learn button on the garage door opener.
3. Press and immediately release the Learn button. The Learn LED glows steadily for 30 seconds.
4. Within 30 seconds, press and hold the remote button you want to use.
5. Release the button when the garage door opener lights blink or two clicks are heard.
6. Press the button you programmed to test it. The garage door opener activates.
7. Keep the garage door clear of people and objects while programming and testing.

What's in the Box

• 1 Anderic 971LM remote
• Visor clip
• Battery not included

Compatible Models

• LiftMaster, Chamberlain, Sears Craftsman and Raynor Security+ openers with a red/orange Learn button (390 MHz)
• Works with many LiftMaster, Chamberlain and Craftsman garage door openers, including models such as 950CB, 953CB, 139.53661 and 139.53661SRT.

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.