The Anderic RR850LM is a substitute for the Stanley 1094 remote. It is a universal garage-door/gate opener receiver add-on kit.
Specifications
- Shipped kit: Anderic RR850LM three-channel add-on receiver and RR893LM three-button remote
- Radio frequency (RF)
- Battery: 1 CR2032 (not included)
Good to Know
- Wiring is specific to your operator
- Key names and layout may differ from the original. Compare your original's buttons before ordering.
- Keep the garage door clear of people and objects while programming and testing.
Setup / Pairing
- Install the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Disconnect ALL operator and receiver power before wiring. Use the included power supply, or the operator's low-voltage receiver terminals (9–30 VAC / 9–34 VDC). Never connect the receiver directly to mains.
- Hold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.
- Within 30 seconds, press and hold the remote button you want to program.
- Release the remote button when the receiver LED blinks and then turns off. Programming is complete.
- For separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.
- If you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.
- Test the remote. Only operate the door or gate when you can see it clearly and the path is clear.
What's in the Box
- 1 Anderic RR850LM three-channel add-on receiver with antenna and hook-and-loop mounting
- 1 power supply
- 1 Anderic RR893LM three-button remote
- No keypad in this base kit (GUK-R is sold separately)
- Handset battery not included
Compatible Models
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Frequency Type : RF/Bluetooth
Dimensions: 3.00 x 2.00 x 1.00 (W x L x D, inches)