The original COMCAST RC1475507/02B Remote Control is in-stock and ships within 24 hours.
The original COMCAST RC1475507/02B Remote Control carries a 60-Days Warranty.
Comcast Universal Remote - Red OK/Select Button. Pre-programmed to work all Cisco RNG boxes but can be programmed to work any cable box with instructions provided.
This remote will program to work the following brand Cable box units: ABC, Americast, Bell South, Comcast, Cox, Digeo, Director, General Instrument, GoldStar, Hamlin, Jerrold, Memorex, Motorola, Pace, Panasonic, Paragon, Philips, Pioneer, Pulsar, Quasar, Regal, Runco, Samsung, Scientific Atlanta, Sony, Starcom, Supercable, Torx, Toshiba, Time Warner Cable, Zenith
I THINK THE REMOTE WILL BE GOOD AND A LITTLE DIFFERENT FROM MY BAD ONE-*** SERIES WHICH YA'LL SAID HAD BEEN DISCONTINUED AND REPLACED WITH THIS COMCAST REMOTE. THE CODES DIDN'T WORK FOR CABLE SETUP TO CONTROL DIGITAL CABLE BOX FOR MY RCA TV. I HAD TO USE THE AUXILIARY OPTION TO GET A CODE MATCH, BUT I BELIEVE ON MY OLD BAD REMOTE IT WAS SETUP USING THE AUXILIARY MODE ALSO, SO THAT IS UNDERSTANDABLE. AS A MATTER OF FACT OUR *** CABLE TECHNICIAN THAT INSTALLED THE CABLE BOX SAID I COULDN'T USE ANY OTHER REMOTES TO CONTROLL THEIR NAMEBRAND SPECIAL CABLE BOX FROM OUR CABLE PROVIDER -***.. BUT I DID WITH OLD REMOTE, AND I DID WITH YOU'RE COMCAST REPLACEMENT. I HAD BAD TIMING ON THIS ORDER AS I HAD TROUBLES WITH MY CABLE BOX AND I ASKED DO YOU HAVE AN EXTRA *** REMOTE IN HIS TRUCK AFTER HE FXED MY CABLE BOX PROBLEM AND HE SAID SURE I'LL GET YOU ONE. I RECEIVED THE COMCAST REMOTE FROM YA'LL THE SAME MORNING. NOW I HAVE AN EXTRA ONE I DON'T REALLY NEED AND WILL USE IT FOR A SPARE IF NEEDED. I CAN'T RETURN IT I DON'T BELIEVE BECAUSE IT'S A UNIVERSAL ONE AND RETURN SHIPPING WOULD BE TOO MUCH BECAUSE IT WAS JUST $15.00 ANYHOW--WORKS GOOD AFTER GETTING CODE MATCH BY USING AUXILIARY MODE FOR CABLE BOX--***--THANKS *** ***
Unless you have X1 From Xfinity this is the only remote you should ever consider for other Xfinity and Comcast products. I have (9) Flat screens in my house and by the pool and recently had to change my HD receivers to a newer model (RNG 110).
The remote that came with this equipment was nothing but junk didn't work most times. The RC1475507/02B used to be the standard and I had one left after turning in my old equipment and decided to give it a try and it work great so I bought (8) more. One other note, you don't have to change to X1 if you don't want to. You can still get everything X1 has as programming with the RNG 110 you just don't get some of the crazy frills that you don't need if you still like to use the brain God gave you.
Very happy with my new remote. It came in record time. I could have gotten a new remote free from my cable provider but they couldn't get me this model. Since we'd had this one for many years & we were used to it we didn't want to get accustomed to a different one.
Unfortunately, the code for my CISCO cable box, in not on your list. A call to your office as answered by a man who said he didn't know the code. As of now, I own a brand new useless piece of equipment. If you can supply me with the CISCO code it would be most welcome
It works fine but instructions are very difficult to follow. I still haven't set it up, I keep reading instructions and hope some day to be able to complete the task. I have two college degrees and still find it a challenge.
Their website was easy to navigate to find the right product. Ordering was easy. The product arrived quickly. It was exactly what I ordered. I use it daily and it works great. I have used Replacement Remotes in the past and was equally pleased then.
This remote replaced the one Comcast provided. Rather than deal with extremely poor customer service from Comcast, I found this seller and was so glad that I did. The remote works perfectly, I was treated with the utmost care by this seller and highly recommend to everyone. This seller sets the gold standard for outstanding customer service!
Rather than going to the Comcast office and waiting in long lines to get a new remote, getting them through Remote Replacements was easier and quicker. The remote works perfectly with the Comcast cable box.
thank you for the quick shipping and for the help setting up, customer service was terrific, and shipping time was super fast. I know where to buy more if needed, thanks again from one very satisfied customer!
I have used around 40 of the Comcast remote I purchased on SA/Cisco DVR's and STB's. They work well. I did need to contact Replacement Remotes to find out the unlock code (982) before I could program them for my use. Only hade 1 remote with a problem. I will ask for a replacement with my next order.
The Comcast Remote has a nice feel, I like it except that I was not smart enough to re-program the Cable Button to control my Time Warner Explorer 4250HDC Cable Box. However I accomplished by needs using the AUX and TV buttons. This was a second Remote so my wife and I could sit in different chairs and each have a Remote of their own. I have a Time Warner Remote also.
Buttons on old Comcast remote were no worn out. Ordering was easy, price was good, shipment was quick. I programmed to remote to turn on and off cable, TV and receiver with one button. If anyone needs a new or updated remote, this is the place to go.
Was a replacement for our old Comcast remote but a slightly different model. It operated all the same devices that the old remote did but the same device the old remote would not work with , this one did not either.
The instructions that came with the remote were useless as far as doing setup with my converter box. The instructions received from Comcast itself (via help chat desk) were right-on and very different than the ones provided with the remote.
Q:"I cannot program under CABLE mode, what can I do?"
You must unlock the remote first. When doing this procedure, make sure the CABLE light blinks 4 times. If it only blinks twice, then do these steps again, until you see it blink 4 times. After it blinks four times, you do not have to do this unlock instructions again.
To unlock CABLE mode (so you can program the remote to your cable box):
1. Press CABLE key.
2. Press and hold SETUP key until CABLE key blinks twice and goes off.
3. Enter code 982 ; CABLE LIGHT WILL BLINK 4 TIMES TO CONFIRM CABLE KEY UNLOCKED.
Once you have completed the unlock sequence and the CABLE light blinked four times to confirm unlock, proceed to programming the CABLE mode:
Instructions for programming the CABLE mode:
1. Make sure cable box is turned on.
2. Press and release CABLE button.
3. Press and hold SETUP key unit CABLE light blinks twice and turns off. Release the key.
4. Type in code (codes are located in booklet that was provided with your remote). Mode key will blink twice to confirm acceptance of the code.
Now try it on cable box. It should be working. If not, repeat steps 1-4 with the next code in code list.