Direct replacement for faulty MR77A, but no light dimming feature. Fan has been running for 2 weeks, no more random speed, direction or light changes. Fast shipping: ordered on Tuesday, got on Friday! Very happy customer!

My daughter and I searched for this solution to our two, beautiful, but dead ceiling fans. Worked perfectly. You saved us!!!!

Fits perfectly and works perfectly. Bought two and they are both still working after 2 weeks.

So glad I read the reviews! We used this as a replacement for MR77A- and it works perfectly!

Installed in minutes. Works great. Original receiver was a MR77A.

Top notch, exceeded expectations. Great find...!

The replacement worked perfectly. Only problem was the original bracket for the RF receiver could not be used to hold the Anderic system. I had to bend the supporting tabs out of the way to be able to replace the fan dome over the unit.

Item arrived on time as indicated. It fit my fan perfectly with no problem except that one of the connectors had to be replaced. Used a connector from the old unit by cutting the wires on both units to exchange the connectors and soldering the splice. I set the codes on the unit and remote and installed the unit in the fan. It worked perfectly. Thanks.

Great seller. Fast shipment and product is just as described.

Received timely, installed working great.

Worked correctly

The part worked as it should but was not an exact fit inside my fan and couldnt be screwed down. I bent the mounting tabs and forced it into the pocket and closed her up. It fixed the fan! It saved me 300$ from buying a new fan.

Install took 8 minutes and everything worked on the first try. Have noticed fan turns slower than original. Don't understand the electronics enough to figure out why, but perhaps as a vendor of this product Dan's can give us an answer about it and find out if the maker can do anything about it. Probably nothing will happen.

I was amazed how easily it was to install.my fan has been broke for a long time if I new how easy it was I would of done it right away.thank you.

Replacement receiver and remote for a Hunter ceiling fan. Hunter does not make them anymore, great service, prompt fulfillment. Note: on my Hunter Model fan, I had to use the connectors from the old receiver, and splice them on the new one for my fan kit to work. No issues, very easy install, and my fan/light and remote work without issue. A lot cheaper than replacing the whole fan. I will certainly use Dan's again!!

Product was of good quality! Exactly what I ordered and needed. Will recommend this site to everyone.

This remote control receiver and transmitter breathed new life into our original Hunter ceiling fan. I studied the pictures and particularly the connections and it looked like it would work. It turns out to be a near-exact replacement and our fan is fully functional again. Install took less than 20 minutes and working with Dan's was easy and efficient. Great product and a great company to deal with.

A 99.99 % same replacement product. The only difference is the aluminum bracket intended to locate the receiver in the light housing. The new one has shorter extensions than the original, but they're easily bendable enough to be pulled out from the receiver enough to make the unit fit snugly in the light housing if needed. I bent them to have a 1/2 inch space from the receiver on both sides at the end of each, leaving them like springs with enough tension to work perfectly and snugly for our fan with light unit. Otherwise, the unit is an exact replacement for the old one, installs easily, and the new remote works with it just like the original, or better. Great find! And Dan's Electronics is a great find too!

worked perfectly after reading the directions several times

Didn't like having to break the bracket off the fan housing to install the replacement part. Otherwise the replacement worked.

Yes - my ceiling fan works again!! Received the product much faster than estimated given - thanks guys. I would give it 5 stars but was a very snug fit for my fan.

Exactly as ordered; instructions easy to follow!

Works great now but the receiver casing is to big and was a pain to get it back together. Fan cover with receiver was tough. Almost gave up but finally worked to get the cover screws in.

It works as it is supposed too.

Didn't have mounting tabs parts loose but worked with modifications house sold and needed it fixed good fast service

worked as described!

Fast shipping and perfect product. So happy my fan works now:)

As advertised. Works well and the installation was easy.

Works good!

Fit perfect , works great

Great product, was a plug and go, Arrived on time Will recommend to everyone

excellent product, works perfect

Fast shipping, easy installation instructions, sure beats replacing a $300 fan!

Perfect replacement worked like a charm. Flawless experience. Thanks.

even though the first one stopped working they sent another and refunded my money quickly the new vone seems to work great

Easy to install and works great

Works perfect

Came with easy to follow instructions, was simple to replace and fan now woks great again.

Exact replacement easily installed working perfectly

Product is great. Poor delivery. I paid n extra ten dollars. Should have had regular delivery.

Works well.

Works well!

Works great, easy install.

Great job helping me with my ceiling fan

Works as promised

This is not a direct replacement for Hunter fan #, but made adjustments (OD dia. was 1/8 inch +) and completed the installation. Works fine.

The product is installed very well, it is very well packed and the delivery is excellent. The only problem I have (I, not the product) is that I have not been able to try it, because I installed it on my fan and it does not start. Surely the fan has another problem different from the part I bought. Anyway, my review is excellent. Thank you.

Works as advertised

Perfect Plug n play!

Quality part ! Excellent price !

Works like they are supposed to. Thanks

This combo replaces a poorly designed original Hampton Bay receiver that was always trouble. This design is much better and works first time, every time.

Put it in and reset the code. No issues, works like new.

THANKS DANS , NOT OFTEN DO ELECTRICAL PARTS WORK CORRECTLY RIGHT OUT OF THE BOX! GREAT PRICE , SERVICE, AND PRODUCTS! WILL USE DANS AGAIN.

Work great. New unit is slightly larger than original. Had to modify the cover just a little. Once I connected and restored power, it worked perfectly.

Easy to install. You might need to remove the old bracket but who cares. The delivery and price were timely and great. Top of my list for future needs.

So far so good. The customer support could have been a little faster, more friendly and a bit less robotic but so far the product does everything it's supposed to do. Fingers crossed!

Exactly as described, fast shipment, excellent packing & great communications

I have 2 68" Altura fans which died due to the shoddy receiver. This replacement receiver/remote kit worked perfectly after trying for months to figure out what was wrong with the fan. Don't try to get a remote to match the MR77A receiver...I did that and wasted my time. Get this combo and get your fan back in working order. I'll be ordering another one of these for my other fan soon!

Plug and play! works great!

10 min fix, worked great.

Perfect!!!!!

Fast shipping, works well

works great, not hard to install.

Only complaint; had to modify the mount. Otherwise, plug and play.

Fit and works properly – first try

Worked great, easy fix.

The receiver is to big to fit in the mount.Serial number matches, need help please !

Works great. Quick shipping and easy to install.

Excellent replacement for the speed controller in my Hampton Bay Altura 65 ceiling fan. Easy to install, good fit, works perfectly.

Worked perfectly. Received timely. Recommend it.

Worked great for my Hampton bay Altura fan.

Works perfectly. Thank you. This is what i needed.

Every thing worked fine but the light kit wires had to be cut and wirenutted.

Didn't know what to expect but this replacement part worked great with my ceiling fan. A bit pricey for a replacement part.

Adequate replacement. Very difficult to install. Need to move connector from vertical to horizontal position. Great remote with regular easy-to-obtain battery.

Product worked as stated, no problems and easy to install

Worked like a champ. The only problem was the dimmer for the light didnt work.

Works great with the Home Decorators Altura 68" ceiling fan. The only difference from the original remote is that it doesn't dim the light. Hence 4 Stars. Otherwise I like the fact you program receiver and remote with dip switches, rather than by frequency recognition (original unit) by turning power off and synching within 30 seconds; this caused problems during power outages if you had more than one unit.

Got this as a replacement for the dreaded MR77A that failed in my fan. Direct plug in for the fan. Someone said this has no dimming feature. I can confirm that the one I received does in fact have dimming. I did however need to remove the little piece of metal that the previous remote mounted to, as this unit doesnt mount the same way.

Aside from having to modify the original housing a little, this thing was perfect and easy to install.

happy that the fan works now, its hot here

Ariived quickly. And it worked perfect.

Order arrived on time. Easy to install, works fine.

Took 10 minutes to install, and worked perfectly. Can't ask for more than that.

I was finally able to fix a fan that hasn't worked properly in over 10 years rather than replace it. This part easily snapped in to the housing unit and worked perfectly.

Worked perfectly!

Excellent replacement part. No problem installing.

This is a great replacement for the original unit. Works perfectly.

Ordered the kit and it was received in a very short time and well packaged. Installation was easy except for one thing; that's why only 4 stars. It would have been very nice if mating connectors would have been supplied. They were not so I had to cut off the connectors on the light wires and connect the lights with two wire nuts. Everything worked flawlessly and I would recommend this kit to anyone that has a malfunctioning remote or receiver. It turned out that my old remote was functional, but the receiver was the culprit. Hint: Buy the kit like I did, and don't try to figure out which one is defective.

Unit appears to be direct replacement and is working correctly. Only concern is heat sink is considerably smaller than original and does not hold the unit in place. On original unit heat sink wings press against fan housing holding unit in place. This also added the fan housing as part of heat sink.

came very fast and it works perfectly thank you

This worked perfect. tks

Perfect fit. Exact replacement.

SOOOOO glad for all these reviews!!! Fixed my Altura 68" fan. Perfect match of the plugs and pins. You need to buy the set of receiver and remote. I wasn't going to but glad I did. My old remote wouldn't work with it even though I had the dip switches in identical settings. The MR77a is plagued with issues so hoping this is an upgrade.

The remote and module work great. Changed switch settings on remote and module then tried it without issue. Replaced my Nutone set perfectly.

Everything worked out with the new receiver but its not the same yellow round unit that you show in the picture. The new receiver has to go up top inside the ceiling cover and you need to add a blue wire through the motor shaft to connect the lights. Worked out good.

Very easy to replace. This is my second replacement for this fan. The original and first replacement did not last very long. Hopefully this one will be better.

Our fan stopped responding to wall switch and remote. I ordered this replacement kit and installation was quick and easy and the fan works great! Highly recommended.

Excellent remote worked like the original

So far so good. Items in new condition. Receiver fit the fan perfectly and everything is working. Have had issues with remote in the past (burned through 3 of them) so time will tell if this one will last.

Purchased an Altura 68 in. fan from Home Depot about two years ago. Great fan...horrible experience with original remote control system. Fan had a mind of it's own changing speed and direction. It finally gave up the ghost a couple weeks ago and I almost gave up on it completely until I happened upon this website. Switched out the unit in about five minutes and Hey Presto! Works like a charm now! Would highly recommend this product....saved me from buying another $200 plus fan. Thank You ReplacementRemotes.com!!! Fast shipping too.

I thought my expensive fan was going to the trashcan until I came upon this kit, it plugged right in and works flawlessly. Thanks!

Easy to install and works perfectly.

Great doing business with you.. Looked all over for the parts for years and could not find them... Thanks to you... my fan works again.. Thanks again, Ken Hayes

This product was exactly as described. Arrived quickly. It was simple to install. Just had to unplug the old one and put the new one in. No re-wiring. Great product.

I replaced with the old one and put the new one in it and it works great! Very happy with it. Thanks!

Worked as soon as I plugged it in!

Works great!

Worked great on our Home Decorators Altura 68 in. Oil Rubbed Bronze Ceiling Fan which had a mind of it's own... diming light, changing fan speed. Still waiting on Home Depots replacement unit. Thanks!!!!

Great fit & easy installation to fix the problem. Took less than 10 minutes to replace. Thanks...

So far all is good.

Product works well. Instructions were useless and did not match the product or fan.

This was easy to install and the receiver & the remote worked perfectly with all the buttons. The quality is good and the price is reasonable. we replaced the kit in a fan called Nutone, we had & used for 20 yrs. It seemed Nutone didn't have replacement parts, even though they are still in business.

Went right in and worked great

No fuss, no muss. Simple hook up. Got the fan going again. Thanks

Very pleased with the product.

I.like this product and the ease of installation, I want to reorder this product email: jayceefl@gmail.com

Easy to install, works perfectly. Was installed over a year ago

I used the product for my own house

used in a ceiling fan. It is good quality. I would recommend to others.

Perfect replacement part for older fans.

Exact match to worn out parts.. Easy Install....

Ceiling fan

The product worked perfectly and was easy to install.

as good as expected. Great.

-

Remote works the ceiling fan. I would recommend this to anyone needing a fan remote. Quality appears fine.

Works.

Perfect fit, works great

Worked as advertised.

awesome

Exactly as advertised.

The quality of the product so far has been great.

Would recommend to anyone

Excellent replacement part

Part was a direct replacement and works well...fan and light are working again! Thank You.

The product is used in a Hampton Bay Redington III fan which has a wireless remote control. The start and run capacitors in the internal remote control receiver had failed so the fan would only barely start and run. Buying the entire receiver and remote was not much more expensive (and a lot more convenient) than trying to perform a repair. I recommend this to anyone who has a Hampton Bay (or other compatible brand) fan that uses a remote control and the fan does not work any more. The odds are that the motor is fine but the electronics have failed and this solves that problem. I would guess that the quality of the replacement parts exceeds the original.

good

Works great for older Hampton Bay fans.

Replaced the receiver / remote in two fans 6 feet apart. So far, so good.

I ordered 2 replacement units and one of them worked perfectly and had good instructions for installation. The other unit was unfortunately defective but the customer service was excellent. Let's hope that the replacement unit works out. Glad to have received good customers service.

Everything is working perfectly thanks, if I ever need a replacement part for anything else I will contact you

Simple replacement that worked as good as expected.

replacement part works fine

My fan is working again